CYG-MWT Heat Shrink Medium Wall Sleeving
Category: Heat Shrink Medium Wall and Heavy Wall Sleeving
Material:
Outer: irradiation crosslinked modified polyolefin material
(Single-wall type thick-walled tube does not involve the inner layer)
Shrink ratio: 3.5: 14: 1
Features:
• High shrink ratio, the greater the diameter of the quilt was coverage;
• Black sleeving, has excellent UV resistance;
• semi-rigid walled polyolefin material has excellent electrical insulation properties and mechanical protection properties;
• Minimum fully shrink temperature: 135 ℃.
Application:
High magnification of the polyolefin heat-shrinkable tubing material with good electrical insulation properties and mechanical protection properties, its high rate shrinkage characteristics, particularly suitable for a wide range of sizes harness connection or component connection, the thicker type of wall thickness characteristics, especially for electrical insulation protection and mechanical protection.
| Specification | Product inner diameter(mm) | After shrinking the inner diameter(mm) | Wall thickness after shrinking(mm) | Standard length(mm) |
| 8/2 | ≥8 | ≤2 | ≥1.7 | 1220 |
| 12/3 | ≥12 | ≤3 | ≥2.0 | 1220 |
| 16/5 | ≥16 | ≤5 | ≥2.2 | 1220 |
| 19/5 | ≥19 | ≤5 | ≥2.2 | 1220 |
| 22/6 | ≥22 | ≤6 | ≥2.5 | 1220 |
| 28/6 | ≥28 | ≤6 | ≥2.5 | 1220 |
| 33/8 | ≥33 | ≤8 | ≥2.7 | 1220 |
| 40/12 | ≥40 | ≤12 | ≥2.7 | 1220 |
| 45/12 | ≥45 | ≤12 | ≥2.7 | 1220 |
| 55/16 | ≥55 | ≤16 | ≥2.8 | 1220 |
| 65/19 | ≥65 | ≤19 | ≥3.0 | 1220 |
| 75/22 | ≥75 | ≤22 | ≥3.0 | 1220 |
| 85/25 | ≥85 | ≤25 | ≥3.0 | 1220 |
| 95/25 | ≥95 | ≤25 | ≥3.0 | 1220 |
| 115/34 | ≥115 | ≤34 | ≥3.0 | 1220 |
| 140/42 | ≥140 | ≤42 | ≥3.0 | 1220 |
| 160/50 | ≥160 | ≤50 | ≥3.0 | 1220 |
| 180/58 | ≥180 | ≤58 | ≥3.0 | 1220 |
| 205/65 | ≥205 | ≤65 | ≥3.0 | 1220 |
| Item | Test method | Indicator |
| Range of continuous operating temperature | IEC216 | -55℃~110℃ |
| Tensile strength | ASTM D2671 | ≥14MPa |
| Elongation at break | ASTM D2671 | ≥400% |
| Tensile strength after aging | ASTM D2671(150℃，168h) | ≥12MPa |
| Elongation at break after aging | ASTM D2671(150℃，168h) | ≥300% |
| Volume resistivity | IEC93 | ≥1.0x1014 Ω· cm |
| Breakdown strength | IEC243 | ≥20kV/mm |
| Copper stability | ASTM D2671 | BY |
| Axial shrinkage | UL224 | 0~10% |
| Concentricity rate | ASTM D2671 | ≥65% |
| Cracking resistance | ASTM D1693（50℃） | No cracking |
| Water absorption | ISO62(23℃，14DAY) | ≤0.2% |
| Hot melt adhesive (single-wall type sixfold thick-walled tube does not involve) | ||
| Softening Point | ASTM DE28 | 85℃ |
| Peel strength（PE） | DIN30672 | ≥4N/cm |
| Copper stability | ASTM D2671 | No corrosion |
| Antibacterial | ISO846 | BY |
