CYG-BT 1T 1kV Heat shrinkable busbar casing
Category: Heat Shrink Dual Wall Sleeving
Material: Irradiation cross-linked modified polyolefin material
Shrinkage ratio: 2.5:1
Features:
• Environmentally friendly, low smoke, products meet the "RoHS" environmental standards;
• Has good insulation properties;
• has good flexibility;
• Minimum shrinkage temperature: 110 ° C;
• Voltage rating: CYG-BT 1T: 1kV CYG-BT 10M: 10kV
Application field: This product is widely used in busbar insulation protection of high and low voltage switchgear, effectively preventing personal injury and death caused by bare bare row; avoiding short circuit and discharge failure caused by small animals and electrical conductors, preventing corrosion, pollution and flashover Occurs, increases the insulation margin, effectively shortens the inter-stage distance and the pole-to-ground distance, and creates favorable conditions for the miniaturization of the switchgear.
规格 | 收缩前后标称内径比 | 收缩前尺寸(mm) | 完全收缩后尺寸(mm) | 适合母线规格矩形/圆形 | |
---|---|---|---|---|---|
内径(mm) | 壁厚(mm) | 内径(mm) | |||
BT 1T-20/8 | 20/8 | ≥20 | 1.3±0.2 | ≤8 | 20x3/Ф15 |
BT 1T-30/12 | 30//12 | ≥30 | 1.3±0.2 | ≤12 | 30x3/Ф20 |
BT 1T-40/16 | 40/16 | ≥40 | 1.5±0.2 | ≤16 | 40x4/Ф30 |
BT 1T-50/20 | 50/20 | ≥50 | 1.5±0.2 | ≤20 | 50x5/Ф35 |
BT 1T-60/24 | 60/24 | ≥60 | 1.5±0.2 | ≤24 | 60x6/Ф40 |
BT 1T-80/32 | 80/32 | ≥80 | 2.0±0.2 | ≤32 | 80x8/Ф60 |
BT 1T-100/40 | 100/40 | ≥100 | 2.0±0.2 | ≤40 | 100x10/Ф70 |
BT 1T-120/50 | 120/50 | ≥120 | 2.0±0.2 | ≤50 | 120x10/Ф85 |
BT 1T-150/60 | 150/60 | ≥150 | 2.0±0.2 | ≤60 | 150x10/Ф115 |
注:其它规格和要求产品定制
项目 | 测试方法 | 指标 | 典型值 |
拉伸强度 | ASTM D2671 | ≥10MPa | 14.3MPa |
断裂伸长率 | ASTM D2671 | ≥450% | 485% |
老化后抗张强度 | ASTM D2671/136°C/168h | ≥10MPa | 12.5MPa |
老化后抗张断裂伸长率 | ASTM D2671/136°C/168h | ≥400% | 436% |
热冲击 | 200°C±3°C/4h | 不滴、不流、不裂 | 合格 |
低温柔韧性 | ASTM D2671/-40°C/4h | 不开裂 | 不开裂 |
击穿强度 | ASTM D2671 | ≥19kV/mm | ≥23.5kV/mm |
体积电阻率 | ASTM D876 | ≥1.0x10¹²Ω· cm | ≥4.5x1014Ω· cm |
吸水率 | ASTM D570A | ≤0.5% | 0.31% |