CYG-MWT(FR) Heat Shrink Flame-retardant Medium Wall Sleeving

Category: Heat Shrink Medium Wall and Heavy Wall Sleeving

Product manual

Material:
     Outer: irradiation crosslinked modified polyolefin material
     (Single-wall type thick-walled tube does not involve the inner layer)
Shrink ratio: 3.5: 14: 1
Features:
  • Products meet UL224VW-1 flammability rating;
  • High shrink ratio, the greater the diameter of the quilt was coverage;
  • Black sleeving, has excellent UV resistance;
  • semi-rigid walled polyolefin material has excellent electrical insulation properties and mechanical protection properties;
  • Minimum fully shrink temperature: 135 ℃.
 
Application:
    High magnification of the polyolefin heat-shrinkable tubing material with good electrical insulation properties and mechanical protection properties, its high rate shrinkage characteristics, particularly suitable for a wide range of sizes harness connection or component connection, the thicker type of wall thickness characteristics, especially for electrical insulation protection and mechanical protection.

SpecificationProduct inner diameter(mm)After shrinking the inner diameter(mm)Wall thickness after shrinking(mm)Standard length(mm)
8/2≥8≤2≥1.71220
12/3≥12≤3≥2.01220
16/5≥16≤5≥2.21220
19/5≥19≤5≥2.21220
22/6≥22≤6≥2.51220
28/6≥28≤6≥2.51220
33/8≥33≤8≥2.71220
40/12≥40≤12≥2.71220
45/12≥45≤12≥2.71220
55/16≥55≤16≥2.81220
65/19≥65≤19≥3.01220
75/22≥75≤22≥3.01220
85/25≥85≤25≥3.01220
95/25≥95≤25≥3.01220
115/34≥115≤34≥3.01220
140/42≥140≤42≥3.01220
160/50≥160≤50≥3.01220
180/58≥180≤58≥3.01220
205/65≥205≤65≥3.01220
ItemTest methodIndicator
Range of continuous operating temperatureIEC216-55℃~110℃
Tensile strengthASTM D2671≥14MPa
Elongation at breakASTM D2671≥400%
Tensile strength after agingASTM D2671(150℃,168h)≥12MPa
Elongation at break after agingASTM D2671(150℃,168h)≥300%
Volume resistivityIEC93≥1.0x1014 Ω· cm
Breakdown strengthIEC243≥20kV/mm
Copper stabilityASTM D2671BY
Axial shrinkageUL2240~10%
Concentricity rateASTM D2671≥65%
Cracking resistanceASTM D1693(50℃)No cracking
Water absorptionISO62(23℃,14day)≤0.2%
 Hot melt adhesive (single-wall type sixfold thick-walled tube does not involve) 
Softening PointASTM DE2885℃
Peel strength(PE))DIN30672≥4N/cm
Copper stabilityASTM D2671No corrosion
AntibacterialISO846by