CB-DWT(1000) Military Heat Shrink Dual Wall Tubing

Category: Heat Shrink Busbar Sleeving

Product manual

Material: Outer: crosslinked modified polyolefin resin
       Inner layer: hot melt adhesive
Shrink ratio: 2:1, 3:1, 4:1
Features:
  • has excellent oil and chemical resistance;
  • low smoke, flame retardant, meet SAE-AMS-DTL25053 / 4 standards;
  • Good flexibility;
  • continuous use temperature: -55 ℃ ~ + 135 ℃;
  • shrink temperature: 100 ℃ ~ 140 ℃.

Applications: The product according to automotive wiring harness, specific requirements the oil and gas path of the car designed, has excellent oil resistance and insulation properties, flame retardant, RoHS environmental requirements. Meanwhile, the material combines softness and excellent mechanical properties, and the need for applications that require the use of special protection sites in the harsh environment can be widely used in various automotive tubing and line protection.

SpecificationsInner diameterWall thickness after complete shrinkage
Minimum inner diameter before shrinkageMaximum inner diameter after shrinkageTotal wall thicknessWithin a thick plastic
mmInch sizesmmInch sizesmmInch sizesmmInch sizes
CB-1000-2016.0600.2383.1800.1250.737±0.1270.029±0.0050.1020.004
CB-1000-2029.0200.3554.7500.1870.737±0.1270.029±0.0050.1020.004
CB-1000-20312.070.4756.3500.2500.762±0.1270.030±0.0050.1270.005
CB-1000-20418.080.7129.5300.3750.889±0.1270.035±0.0050.1270.005
CB-1000-20524.130.95012.700.5001.070±0.1780.042±0.0070.1780.007
CB-1000-20635.201.42519.050.7501.190±0.2030.047±0.0080.1780.007
CB-1000-3013.0500.1201.0200.0401.020±0.2540.040±0.0100.5080.020
CB-1000-3026.1000.2402.0400.0801.020±0.2540.040±0.0100.5080.020
CB-1000-30311.940.4704.0600.1601.780±0.3560.070±0.0140.7620.030
CB-1000-30423.870.9408.1300.3202.540±0.5080.100±0.0201.0200.040
CB-1000-30539.381.57012.950.5102.540±0.5080.100±0.0201.0200.040
ItemTest methodIndicatorValues
Tensile strengthASTM D638≥10.4MPa14.1MPa
Elongation at breakASTM D638≥200%329%
Cutting modulusASTM D882,2%应变≤172MPa153MPa
Hot shock250±3℃,4hrsWithout dripping, flowing or crackQualified
Cold shockASTM D745,-55±2℃No crackingQualified
Breakdown strengthASTM D2671≥19.7kv/mm26kv/mm
Volume resistivityASTM D876≥1×10123.6×1013
Thermal aging175±2℃,168hrsIn gel does not drip, the skin does not crackQualified
Tensile strength after agingASTM D638≥6.9MPa9.5MPa
Breakdown strength after agingASTM D2671≥15.8kv/mm24kv/mm


Description: The tube cross-sectional area is not a strength test; 2 After cooling to room temperature aging at 10 & plusmn; within 2s wound on the specified diameter mandrel without cracking.